Safety Halo – Laser Safety Halo 3 Light Pack LSHR-3PPK (Forklifts, Vehicles & Fixed Installations))

$3,326.59

This product is in stock
Fast Shipping

Safety Halo – Laser Safety Halo 3 Light Pack LSHR-3PPK (Forklifts, Vehicles & Fixed Installations))

The Safety Halo Laser Safety Halo 3 Light Pack is a Laser lighting kit designed to mark danger and exclusion zones around vehicles and areas within workplaces.

Exclusion zones around moving vehicles  and in workplaces are designed to keep workers safe; however the problem is that it is difficult for workers to see where the exclusion zone is. This is even harder when the vehicle is moving, particularly in close proximity to workers.

When used on a vehicle, the Safety Halo Laser Safety Halo system sets a visual boundary around the vehicle for everyone to see, clearly showing the danger and exclusion zone. As the Safety Halo Laser Safety Halo is mounted to the vehicle, as the vehicle moves, so does the danger and exclusion zone.

Workers can visually see the red lines that the Safety Halo Laser Safety Halo creates which gives a mental warning… DANGER! There is no guess work where the danger and exclusion zone is, which keeps workers safe and reduces the likelihood of accidents.

This system is designed for indoor use and outdoor use at night, dusk and dawn. The sun is more powerful than the lasers used and therefore the laser exclusion zone does not show up on the ground when used outdoors during the day.

Show workers where the danger and exclusion zones are, and take away the guess work!

If you need further information or would like an Onsite Demonstration, Contact Us and a member of our team will be glad to assist.

Uses

The Safety Halo Laser Safety Halo can be used on vehicles as well as fixed installations in manufacturing plants, warehouses, mine sites etc.

Suitable Vehicles

The Safety Halo Laser Safety Halo 3 Light Pack is designed for industrial vehicles such as:

  • Forklifts (LPG, Electric, Diesel etc.)
  • Loaders
  • Bobcats
  • Skid Steers
  • Excavators
  • Rollers
  • Road Profiler’s
  • Overhead Cranes
  • Scissor Lifts
  • Other industrial vehicles

For vehicles that are longer, kits with more lights are available (up to 7 lights in a kit)

Safety Halo Kits are available for 1 ton to 1000+ ton vehicles and machines as well as cranes. If you are unsure which Safety Halo Kits are suitable for your vehicles, machinery or cranes, Contact Us and a member of our team will be glad to assist.

Fixed Installations

The Safety Halo Laser Safety Halo can be used in countless ways to mark danger and exclusion zones in workplaces. As well as being able to be mounted on vehicles, the Safety Halo Laser Safety Halo can be mounted in fixed positions indoors and outdoors (for use at night, dusk and dawn). Uses include:

  • Work Sites
  • Warehouses
  • Loading Areas
  • Pedestrian Walk Ways
  • Mining
  • Railway (Blue when required)
  • Road Work Traffic Control
  • Underground & Tunnel Projects
  • Boom Lifts
  • Warehouse
  • Art Galleries Crowd Control
  • Large Building Emergency Exit Directions

Kit Inclusions

The Safety Halo Laser Safety Halo 3 Light Pack is supplied with all connections required. The kits are designed for quick and easy installation.

  • 3x Class 2 Safe Red Laser Lights (AS/NZS IEC 60825.1:2014)
  • 3x Alloy Mounting Brackets with 3M VHB Mounting Tap on two surfaces for two mounting options. (Note: 3M VHB Mounting Tap is used so no drilling, welding or alterations to the vehicle are required)
  • 1x Connection Box and Surge Protection Unit

Specifications

  • Part Number: LSHR-3PPK
  • Number of Lights: 3
  • Laser Class: Class 2 – AS/NZS IEC 60825.1:2014 (Supplied with Certificate of Compliance and Safety)
  • Beam Distance: Up to 10m
  • Housing Construction: Alloy
  • Light Dimensions: 92 (W) x 62mm (H) x 41mm (D) (measurements include brackets)
  • Warranty: 2 Years
  • Made and developed in the USA

CAUTION

All wiring should be done by a licensed electrician in accordance with state codes, local codes, National Electric Code (NEC) standards and International standards.

Improper installation may result in serious injury and void warranty.

Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD).

Surge protective devices should be utilised for fixtures installed in environments subject to power surges outside the specified operating parameters.

The Safety Halo Laser Danger Light is designed and intended to provide visual indication of potentially unsafe locations for equipment, personnel or assets near or around moving equipment. By itself, the Safety Halo Laser Danger Light does not provide any physical or location collision avoidance. Proper installation, aiming and maintenance of the Safety Halo Laser Danger Light is critical to its effectiveness as an indicator of potentially unsafe areas.

Additional information

Brand

Light Type

Product Category

Workplace Safety Type

At Boost Safety & Workwear, we pride ourselves on offering an extensive range of quality safety certified products at low prices matched with premium customer service and fast shipping!

We offer a variety of discounts which ensure you will always get a great deal when purchasing from Boost Safety & Workwear. Our discounts include:

  1. Item Quantity Volume Discounts: The higher the quantity of the product purchased, the cheaper the per unit price becomes. Item Quantity Volume Discounts are shown in a table above the Add to Cart button on the product page for eligible products.
  2. Order Value Discounts: For orders of mixed PPE, Workwear and Workplace Safety products, a discount is applied based on the total order value:
    • $250 to $849: 5% OFF
    • $850 to $1749: 10% OFF
    • $1750 to $2499: 15% OFF
    • Above $2500: 20% OFF
  3. Primary Safety Supplier Discount: Save even more by using Boost Safety & Workwear as your primary safety & PPE supplier. Our team will work with you to develop a safety solution and pricing model to suit your industry, workforce and budget. Improve onsite protection and Contact Us today to find out more!

The best discount will automatically be applied in the Shopping Cart. Discounts cannot be combined and used together for the same order. Some exclusions apply. See our Volume Discounts page for more information.

If you have any questions, or want to discuss Boost Safety & Workwear becoming a primary safety supplier for your Business, Organisation or Government Department, please don’t hesitate to Contact Us and a member of our team will be glad to assist.

To assist Businesses, Organisations & Government Departments with 15 or more employees select the right PPE, Workwear and Workplace Safety products, we offer Free Trial Samples.

Benefits of Testing PPE, Workwear & Workplace Safety Products

  • Increased worker compliance and wear rates due to improved suitability and comfort
  • Increased protection and safety
  • Reduction in injuries as well as associated downtime and medical costs
  • Reduction in costs through increased durability and useful life
  • Motivated, productive staff and reduced worker complaints
  • Improved risk awareness

To request Free Trial Samples, please complete the form below and a member of our team will get in contact with you.

Free Trial Samples Request Form


    Reviews

    0

    0
    0
    0
    0
    0
    Be the first to review “Safety Halo – Laser Safety Halo 3 Light Pack LSHR-3PPK (Forklifts, Vehicles & Fixed Installations))”

    Your email address will not be published. Required fields are marked *

    There are no reviews yet.