Safety Halo – LED Safety Halo 3 Light Pack SHRL-30PPK (Forklifts & Small Vehicles)
The Safety Halo LED Safety Halo 3 Light Pack is a LED lighting kit designed to mark danger and exclusion zones around vehicles.
Exclusion zones around moving vehicles are designed to keep workers safe; however the problem is that it is difficult for workers to see where the exclusion zone is. This is even harder when the vehicle is moving, particularly in close proximity to workers.
The Safety Halo LED Safety Halo system sets a visual boundary around the vehicle for everyone to see, clearly showing the danger and exclusion zone. As the Safety Halo LED Safety Halo is mounted to the vehicle, as the vehicle moves, so does the danger and exclusion zone.
Workers can visually see the red lines that the Safety Halo LED Safety Halo creates which gives a mental warning… DANGER! There is no guess work where the danger and exclusion zone is, which keeps workers safe and reduces the likelihood of accidents.
This system is designed for indoor use and outdoor use at night, dusk and dawn. The sun is more powerful than the LEDs used and therefore the LED exclusion zone does not show up on the ground when used outdoors during the day.
Show workers where the danger and exclusion zones are, and take away the guess work!
If you need further information or would like an Onsite Demonstration, Contact Us and a member of our team will be glad to assist.
The Safety Halo LED Safety Halo 3 Light Pack is designed for smaller industrial vehicles such as:
- Forklifts (LPG, Electric, Diesel etc.)
- Skid Steers
- Small Excavators
- Road Profiler’s
- Other small industrial vehicles
For vehicles that are longer, kits with more lights are available (up to 7 lights in a kit)
For vehicles that are higher, the Safety Halo Laser Safety Halo is recommended, as the laser light has a longer reach.
Safety Halo Kits are available for 1 ton to 1000+ ton vehicles and machines as well as cranes. If you are unsure which Safety Halo Kits are suitable for your vehicles, machinery or cranes, Contact Us and a member of our team will be glad to assist.
The Safety Halo LED Safety Halo 3 Light Pack is supplied with all connections required. The kits are designed for quick and easy installation.
- 3x 30W Red LED Lights
- 3x Alloy Mounting Brackets with 3M VHB Mounting Tap on two surfaces for two mounting options. (Note: 3M VHB Mounting Tap is used so no drilling, welding or alterations to the vehicle are required)
- 1x Connection Box and Surge Protection Unit
- Part Number: SHRL-30PK
- Number of LED’s: 2 Quality 15 Watt Cree LED’s per light
- Number of Lights: 3
- Light Output: 1950lm Red Line Beam each light
- Watts: 30 Watts per light
- IP Rating: IP67 Water & Dust Proof
- Vibration Rating: Vibration Resistant 7g
- Housing Construction: Die Cast Aluminum
- Lens Construction: Polycarbonate
- Light Dimensions: 134mm (W) x 111mm (H) x 65mm (D)
- Wiring: 1.2m Sheathed Cable with Deutsch Connector Plug
- Operation Temperature: -40 to +65 Degree Celsius
- Warranty: 2 Years
- Approval: ECC (ECE R10)
All wiring should be done by a licensed electrician in accordance with state codes, local codes, National Electric Code (NEC) standards and International standards.
Improper installation may result in serious injury and void warranty.
Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD).
Surge protective devices should be utilised for fixtures installed in environments subject to power surges outside the specified operating parameters.
The Safety Halo LED Danger Light is designed and intended to provide visual indication of potentially unsafe locations for equipment, personnel or assets near or around moving equipment. By itself, the Safety Halo LED Danger Light does not provide any physical or location collision avoidance. Proper installation, aiming and maintenance of the Safety Halo LED Danger Light is critical to its effectiveness as an indicator of potentially unsafe areas.
Show only reviews in English (0)
There are no reviews yet.